無錫廣泰鑿巖GTK45S頂驅式液壓鑿巖機
無錫廣泰鑿巖,根據市場需求,持續研發新產品,以滿足市場多維度需要。GTK45S頂驅式液壓鑿巖機公司結合國內外需求,自主研發頂驅式液動回轉鑿巖機系列產品。GTK45S采用模塊化設計,三維建模、仿真計算。主要用于礦山、隧道、井下等鉆爆破孔,具有鉆進效率高,鉆具損耗低、有使用壽命長、安裝維修方便等特點。沖擊和回轉:沖擊和回轉流量較低,特別適合國內傳統潛孔鉆機改頂驅鉆機用。鉆孔:適合于各種巖石鉆孔,鉆直徑76-102mm。鉆孔排渣:空壓機,4-6.5m3/min,5-8kg/cm2;水30-40L/min, 8-10kg/cm2。Throughtheresearchondomestic and foreignmarket, our Company developed series Top Drive Type Hydraulic DrifterIndependently.Using the software of 3D modeling, simulation, we developed GTK45Swith modular design.It mainly applied to dill the blastholefor Mine, Tunnel and Undergroundetc. High drilling efficiency, low Drilling Tools Wearing, long time Operating Life,EasyInstallationandMaintenance.Impactingand Swing: Its ImpactingFlow and Swing Flow is lower comparing other Hydaulic Drifter,suitable for demestic Drill Rig,change DTH to Hydralic DrifterDrilling: Suitable for drilling all kinds of stone,Drilling Diameterabout 76~102mm.Demand of the Air Compressor or Waterfor Slag Removal: Air 4~6.5 m3(5-8kg/cm2),or water 30-40L/Min(8-10kg/cm2).GTK45S技術參數Technical Parameters外形圖DimensionsGTK45S是針對井下、隧道研發的鑿巖機,也可以用在宣化和衢州潛孔鉆機改頂驅液壓鑿巖機的產品,鑿巖機系統需要的壓力和流量(沖擊65L/Min、回轉60L/Min)可以和潛孔鉆機無縫對接。本產品2020年研發,2021年始供市場,銷售近40多臺,質量趨于穩定。該鑿巖機沖擊功率16kW,沖擊頻率3,000bpm,重量185kg,鉆進孔徑76-102mm,適合12~20T挖掘機做挖改鉆。GTK45S應用在挖改鉆工作視頻